3. IP Phone Grandstream GXP 1610
Last updated
Last updated
Step 1: Plug in the power source
Step 2: Plug in the network cable (LAN port)
Step 3: Plug in the handset and headset (Be sure to plug in the correct port).
Step 4: Get IP address
By default, the device will use DHCP to get the IP. To view the IP of the device:
Wait for the device to boot up completely.
Press NextScr key 2 times
After getting the device's IP, we can log in to the management page by: entering the IP address on the browser (for example, here is http://192.168.1.157/
Login to the default user: admin/admin
Then receive a request to change the password
For example: change to admin1610 => click Save.
After successfully logging in, you will be redirected to the following configuration page:
3. Configure SIP account
To fill in account information, click om ACCOUNTS -> Account 1 -> General Settings
Fill in the corresponding SIP account information as follows:
General Settings
Basic Settings : Choose the SIP transport protocol as TCP, Register Expiration decreases from 60 to 5
Audio Settings : choose PCMA or PCMU
Date and Time:
Check
Choose STATUS view "SIP Registration" section appear "YES" green color like the image:
Ip Phone interface: