# 2. Yealink T19 E2 phone
Set up device:
* Plug in the power source
* Plug in the network wire (Internet port)
* Plug in handset, headset (Note be sure to plug in the correct port)
Network
By default, the device will use DHCP to get the IP. To view your device's IP, please follow these steps:
**Step 1:**
* Wait for the device to boot up and display the main screen
* Choose Menu on the toolbar
**Step 2:**
* Main Menu will display
* Choose Status (or press key 1 on Dialpad)
**Step 3:** Check the IP address of the Yealink IP Phone device, as in the example image below, the IP address will be ***192.168.6.137***
### Configure SIP account on IP Phone
With information from the device account created on AntBuddy, for example:
* **Account Name:** testing
* **Authen ID:** testing
* **Authen Password:** 123456
* **SIP Server:** qahtksungroup.anttel-pro.ab-kz-02.antbuddy.com
* **Outbound Proxy:** ab-kz-02.antbuddy.com
* **SIP Transport:** TCP
Enter this information on the Yealink T19 E2 IP Phone device by following these steps:
**Step 1**:
* Access the IP address of the received IP Phone on the web browser, for example here is the address[ *http://192.168.6.137*](http://192.168.6.137/)
* Login by username and default password:
* Username: **admin**
* Password: **admin**
**Step 2**: Choose Account section
**Step 3**: Enter the information shown below, after choosing **Confirm** button**.**
**Step 4**: After choosing **Confirm** button, check the updated information (**Registered**), as shown in the picture, you have completed configuring information on IP Phone Yealink T19 E2
**Step 5**: Choose PCMU and PCMA codecs as the two main codecs for the phone in Account - Codec, after pressing **Confirm** to save configuration
**Step 6**: Adjust time zone to +7 in **Settings - Time & Date** , press **Confirm** to save configuration
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.antbuddy.us/antbuddy-inc-documents/antcrm-customer-management/antring-call-center/setting/2.-yealink-t19-e2-phone.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.