2. Yealink T19 E2 phone
Last updated
Last updated
Set up device:
Plug in the power source
Plug in the network wire (Internet port)
Plug in handset, headset (Note be sure to plug in the correct port)
Network
By default, the device will use DHCP to get the IP. To view your device's IP, please follow these steps:
Step 1:
Wait for the device to boot up and display the main screen
Choose Menu on the toolbar
Step 2:
Main Menu will display
Choose Status (or press key 1 on Dialpad)
Step 3: Check the IP address of the Yealink IP Phone device, as in the example image below, the IP address will be 192.168.6.137
With information from the device account created on AntBuddy, for example:
Account Name: testing
Authen ID: testing
Authen Password: 123456
SIP Server: qahtksungroup.anttel-pro.ab-kz-02.antbuddy.com
Outbound Proxy: ab-kz-02.antbuddy.com
SIP Transport: TCP
Enter this information on the Yealink T19 E2 IP Phone device by following these steps:
Step 1:
Access the IP address of the received IP Phone on the web browser, for example here is the address http://192.168.6.137
Login by username and default password:
Username: admin
Password: admin
Step 2: Choose Account section
Step 3: Enter the information shown below, after choosing Confirm button.
Step 4: After choosing Confirm button, check the updated information (Registered), as shown in the picture, you have completed configuring information on IP Phone Yealink T19 E2
Step 5: Choose PCMU and PCMA codecs as the two main codecs for the phone in Account - Codec, after pressing Confirm to save configuration
Step 6: Adjust time zone to +7 in Settings - Time & Date , press Confirm to save configuration
